Log 116-I113
Originally filed in Drive as 84-D81; renumbered to avoid an ID clash.
Designation: Bowling Alley Gallery BA-82
Apparent date/time: 2026-11-19 09:47 (local) / secondary stamp reads 14:22 04 June 1973
Entry method: Double steel door marked "BA-82 BOWLING ALLEY – STAFF". Exterior clear aperture 1.52 m × 2.11 m. Interior aperture 1.38 m × 2.24 m on entry and 1.61 m × 1.97 m on exit.
Environmental Baseline
Lighting: mercury vapor fixtures, color temperature 4120 K. Intensity constant at 47 lux.
Ambient temperature: 18.7 °C. Humidity: 54 %.
Background sound: continuous ball return cycle at 0.4 Hz. Baseline reading 22 dB.
Air movement: none detected. Barometric pressure 1009.2 hPa on entry; 1017.6 hPa after 4.2 m of travel.
Spatial Observations
Alley hall estimated 28 m long by 9.4 m wide by 3.6 m high. Laser measurement returns 19.7 m long by 8.1 m wide by 4.1 m high.
Floor: maple approach with synthetic lanes. Lane width 1.07 m. Surface remains uniform under repeated contact.
Walls: painted concrete with ball return channels. Paint thickness 0.4 mm. Surface remains uniform under repeated contact.
Ceiling: open metal deck with six mercury vapor fixtures. Fixture count remains six after nine visual inventories.
Repeating motif: every 2.1 m a pinsetter unit occupies the far end. Pin height 380 mm. Finish identical across all units.
Anomalies
Visual inventory of pins returns 10. Physical inventory returns 10. Measured occupied-pin count equals 0 while calculated residual occupancy across the same deck equals 7.
Floor remains level under spirit level. Measured residual wax on the approach slopes 1.8° toward the outbound wall. Slope reverses after 6 minutes of continuous observation without change in physical orientation.
Posted occupancy plaque reads 10 PINS / 0 FRAMES. Measured combined return current at the ball machine equals 0.0 A. Seal integrity lights on the staff door remain green.
Sound of residual impact arrives 3.1 seconds after the corresponding surface disturbance is detected. Delay increases by 0.24 s for every additional 1.3 m of distance from the entry door.
Humidity at mid-lane remains 54 % while residual wax forms on the approach edges after 7 minutes of observation. Wax disperses without measurable change in local humidity.
Local magnetic field strength measures 0.3 gauss at floor level and 1.9 gauss at 1.4 m height. Field direction reverses after 9 minutes without change in gallery state.
Pin count on the setter deck decreases by 6 over 9 minutes while measured return current at the machine remains 0.0 A.
Surface of residual wax on approach edges exhibits electrostatic cling of 3.7 cm against vertical surfaces. Cling collapses after 38 seconds without measurable change in surface charge.
Approach stripe migrates 11 mm toward the inbound wall over 5 minutes while measured ball velocity remains 0.0 m/s.
Exit / Continuity Status
Exit achieved through the same staff door after 22 minutes of observation. Residual wax film remains on footwear. Continuity of recording intact. No further anomalies noted outside the threshold.