ARCHIVE // VALERIE'S COMPLEX

Valerie's Complex

Explorer Logs

Recovered field report

118-K115 — Fracture Gallery X-44

Exit achieved
Log ID
118-K115
Designation
Fracture Gallery X-44
Primary anomaly
Wall Seam Expansion / Surface Tension Reversal / Count Discrepancy / Sound Arrival Lag / Pressure Drop Without Cause
Status
Exit achieved
Date recovered
2026-11-20
Source file
118-K115 Fracture Gallery X-44

Log 118-K115

Designation: Fracture Gallery X-44

Apparent date/time: 2026-11-20 11:22 / 2026-11-20 13:18

Entry method: Noclip through fractured glass panel at 1.5 m height

Environmental Baseline

Lighting: Overhead LEDs, 4100 K. Intensity 110 lux at 0.5 m, 58 lux at 2.5 m. Color temperature reads 4250 K on handheld.

Ambient temperature: 19.1 °C at floor level. 17.3 °C at 1.2 m. 21.4 °C at ceiling. Gradient reverses after 1 minute.

Background sound: 98 Hz oscillation, amplitude 25 dB. Sound arrives 1.9 s after visual confirmation of source. Source not located.

Air movement: static pressure 1.010 bar. Local draft directed toward wall seam at 3.2 m. Draft velocity decreases to 0.0 m/s after 3 minutes.

Spatial Observations

Gallery measures 12.4 m × 5.8 m by laser. Tape measure indicates 15.1 m × 6.9 m. Wall seams expand 0.3 cm every 7 seconds. Seams align with no visible pattern. Ceiling height 3.0 m at entry. 2.4 m at center. 3.6 m at exit. No visible joints. A single seam shows a reflection of a room not present in the gallery. One seam shows a vertical crack that extends 1.2 cm across the surface, but no prior crack exists in the physical structure.

Anomalies

Wall seam expansion rate reads 0.3 cm per 7 s. Measured expansion at 3.2 m point increases by 0.05 cm per minute without change in ambient temperature. Surface tension on wall at 1.2 m reads 0.7 N/m, then 1.3 N/m after 2 minutes. Measured seam count on entry is 14, at center 16, at exit 18. One seam appears to vanish between measurements. Sound of oscillation arrives 1.9 s after visual confirmation. Delay increases by 0.18 s for every 1.4 m of distance from entry. Pressure at wall seam drops to 0.989 bar after 4 minutes, with no change in ventilation. Surface tension reverses after 3 minutes without change in wall state. Measured wall seam length at 3.2 m is 1.8 m, but adjacent reading is 1.7 m. The 1.8 m reading is inconsistent with laser measurements.

Entity Notes

None observed.

Exit / Continuity Status

Exit achieved through original glass panel. Residual oscillation persists at 98 Hz at 2.3 m from center, amplitude 26 dB. Continuity intact.